Two-dimensional catena–polymer [[[bis (µ-aqua)(bis (µ-cpiap-K2O1:O2)sodium(I))] (µ-chlorido) bis(µ-cpiap-K5N1:O1:O2:O3,O3′)dicopper(II)]bis(µ-aqua)(aqua)bis(cpiap-K2O1,O2)copper(II)] hexa hydrate

The new title two-dimensional hetero-tetra nuclear Cu₃–Na coordination polymer {[NaCu₃Cl(cpiap)₂(H₂O)₃]_n·6nH₂O} (1) consists of crystallographically two-independent copper(II) centers, each bridged by a sodium cation through carboxylate-oxygen of the deprotonated H₃cpiap ligand (H₃cpiap = 2-(carboxyphenyl)iminoaceticpropanoic acid) to Cu^II (2) and Cu^II (2⁻) cations, and through water molecules to Cu^II (1) cation. Cu^II (2) and Cu^II (1) cations are bridged by carboxylate-oxygen atoms of the ligand in a syn-anti mode which, alternate regularly within the chain being bridged by a tetra coordinated sodium cation. Each Cu^II (2) and Cu^II (2⁻) cation in (1) is in an octahedral environment formed by four carboxylate-oxygens from two cpiap³⁻ ligands, one nitrogen atom and a bridging chloride atom. Cu^II (1) cation is in a square pyramidal environment formed by three water molecules and two carboxylate-oxygens from two cpiap³⁻ ligands. The ligand acts simultaneously as monodentate and tridentate toward Cu^II (1) and Cu^II (2) cations respectively. The lattice water molecules involved in OH···O hydrogen bonding are situated in the void spaces between layers. The zigzag chains, which run along the b-axes further construct three-dimensional metal-organic framework via hydrogen bonding and weak face-to-face π-π interactions. Weak CH···O interactions are also present.     

Al掺杂对尖晶石型Li[Mn(Al)]2O4结构的影响

采用共沉淀法按不同Al掺杂比例x[x=n(Al)∶n(Mn+Al)=0, 0.025, 0.050, 0.100, 0.150, 0.200]制得了Al(OH)3和Mn3O4混合物, 将其与LiNO3按一定比例混合, 在空气中于700 ℃烧结得Li[Mn(Al)]2O4样品. X射线衍射和Raman光谱结果表明, 在0≤x≤0.20范围内均得到了单相的尖晶石型样品, 随着x的增加, 晶胞参数减小, 晶格振动能量增加, Mn(Al)-O的结合增强, 结构稳定性增强.     

Characterization of the non-stoichiometric and isomorphic hydration and solvation in FK041 clathrate

FK041 crystallizes as a non-stoichiometric hydrate or as solvated hydrates which were characterized as isomorphic clathrates by powder X-ray diffractometry. Moisture and organic solvent vapor sorption studies, differential scanning calorimetry and thermogravimetric analysis revealed that FK041 monohydrate forms a physically stable host crystal, which has lattice channels for guest water and/or organic solvent molecules. The hydration state varies non-stoichiometrically between dihydrate and tetrahydrate depending on the relative humidity and the mol content of the co-existing organic solvent, that is 2-propanol, ethanol, or acetone. These organic solvents are thought to replace a part of originally present water with a mol ratio of 1:3. 2-Propanol exhibited the most stable solvation, indicating that the size and shape of 2-propanol are the most preferable to the lattice channels.     

I NQR and spectroscopic investigation of impurity-doped and mixed lithium iodate Li1−xHxIO3 crystals

The ¹²⁷I NQR, IR absorption and Raman spectra of impurity-doped and mixed lithium iodate Li_1−xH_xIO₃ crystals grown from water solutions with different LiIO₃/HIO₃ ratios were investigated depending on the content of the impurity hydrogen x. The NQR results suggested that, at small concentration of doping iodic acid x<0.22, the lattice dynamics of the crystal grown from water solution changes significantly though the crystal retains hexagonal symmetry. Spectroscopic studies are compatible with average hexagonal symmetry of the grown doped crystals. From the results of Raman studies at room temperature and 100 K, the concentration range of hydrogen dopant 0.22<x<0.36 was found where disordered solid solution crystals Li_1−xH_xIO₃ are formed.     

红外光谱研究甲烷和氧与SrO-La2O3/CaO表面的相互作用

在甲烷氧化偶联（ＯＣＭ）反应条件下，用原位红外光谱研究ＳｒＯ－Ｌａ２Ｏ３／ＣａＯ催化剂，结果表明，晶格氧使甲深度氧化，Ｌａ２Ｏ３和ＣａＯ具有活泼的晶格氧，ＳｒＯ的晶格氧比较稳定，气相氧通过催化剂表面消耗掉的晶格氧，加速甲烷了深度氧化，另一方面，催化剂表面的碳酸根物种在氧气氛下分解，在Ｌａ２Ｏ３和ＬＣ催化剂中，催化剂表面Ｌａ２Ｏ２（ＣＯ３）的分解形成配位不饱和的晶格氧Ｏ＾２－，并为气相氧吸附提供氧空     

用二维色谱技术测定聚合反应气体组成

介绍一种无阀切换的二维气相色谱分析方法。采用两根不同性质的色谱柱并联连接，样品分别经两根色谱柱分离后汇合在一起进入同一检测器。一次进样可同时测定Ｈ２、Ｏ２、Ｎ２及Ｃ１～Ｃ３的组分。     

The intermolecular potential function of Smith–Thakkar type for C60

The intermolecular potential function of Smith–Thakkar type for C₆₀ has been proposed, and its expression is as follows

The unit of u(r) is J/mol, r is the distance between two C₆₀ molecules center and the unit is nm. Some properties of C₆₀ in the gas and crystal have been studied using the interaction potential of Smith–Thakkar type, such as stability of C₆₀ crystals, virial coefficient and lattice dynamics.     

主动冷却点阵夹层防热结构温度响应计算模型北大核心CSCD

针对点阵夹层结构主动热防护问题,建立了夹层结构面板和芯体导热与冷却剂对流耦合的非稳态传热理论模型,利用有限体积法离散控制方程并在MATLAB中进行了迭代求解.模型首次考虑了面板与夹芯杆之间的收缩热阻,并利用分离变量法得到了收缩热阻的近似解析解.基于单胞模型和周期性边界条件,模拟得到了模型所需的表面对流传热系数h_(b)和h_(fin).最后,选取多单胞计算工况进行数值模拟和理论模型对比,并讨论了收缩热阻对模型预测精度的影响.结果表明:理论模型能够准确预测夹层结构及内部流体的温度变化,理论与仿真之间的最大误差不超过1%;随着外加热流密度不断增大,忽略收缩热阻使得计算结果造成的误差不断增大;与数值模拟相比,理论模型可显著地减少计算时间并节省计算资源,尤其适用于非均匀、非稳态复杂热载荷下点阵夹层结构的温度响应计算.     

M-矩阵平方根的一类迭代法

矩阵平方根在数学的许多应用中起着重要的作用.本文研究M-矩阵平方根的计算问题,提出一种计算正则M-矩阵平方根的迭代方法.首先将这个问题转化为M-矩阵代数Riccati方程,进而提出一种有效的方法来求解这个特殊的MARE.理论分析表明,该方法在一定条件下是收敛的.数值实验表明该方法是可行的,且优于二项式迭代法.     

Analytical solutions of the lattice Boltzmann BGK model

Analytical solutions of the two-dimensional triangular and square lattice Boltzmann BGK models have been obtained for the plane Poiseuille flow and the plane Couette flow. The analytical solutions are written in terms of the characteristic velocity of the flow, the single relaxation time , and the lattice spacing. The analytic solutions are the exact representation of these two flows without any approximation. Using the analytical solution, it is shown that in Poiseuille flow the bounce-back boundary condition introduces an error of first order in the lattice spacing. The boundary condition used by Kadanoffet al. in lattice gas automata to simulate Poiseuille flow is also considered for the triangular lattice Boltzmann BGK model. An analytical solution is obtained and used to show that the boundary condition introduces an error of second order in the lattice spacing.